CFA Fabric: What Cutting for Approval Means and How to Use It
CFA stands for “cutting for approval.” It is a piece of fabric cut from the same stock your order will be filled from, sent to you so you can approve color, hand and quality before the full yardage is cut. For drapery, upholstery and any project where several panels or pieces must match, it is the most reliable way to confirm what you will actually receive. At Beautiful Windows Elgin, our fabric samples and design consultations are built around the same goal: no surprises when the yardage arrives.
This guide explains what a CFA is, how it differs from other samples, when to ask for one, how to judge it, and what to check about returns on cut fabric.
TL;DR
- A CFA (cutting for approval) is cut from the roll or dye lot your order will come from, so it shows the real fabric, not a representative one.
- A catalog swatch or a sample picked months ago can differ in color from today’s stock, because fabric is made in batches.
- Request a CFA for multi-panel window treatments, large upholstery jobs, and any order where one color must run through the whole project.
- Judge it in the room where it will hang, in daylight and evening light, against your other materials, and keep it as your approved standard.
- Before ordering cut yardage, read the seller’s policy on returns, because cut-to-length fabric is often treated differently from stock items.
Table of Contents
- What CFA means when you order fabric
- Why a CFA protects your project
- Who asks for a CFA
- How to request and evaluate a CFA
- What to look at when judging a cutting
- Returning cut fabric: what to check before you order
- Ready-made curtains, marine and utility fabric
- How we approach this at Beautiful Windows Elgin
- Our perspective
- FAQ
- Sources
What CFA means when you order fabric
A CFA is a physical cutting taken directly from the roll that would be used for your order. A buyer reviews it, approves or declines it, and only then places the order. One supplier’s policy page puts it plainly: cuttings for approval are cut directly from the roll that would be ordered. Because of that, the piece is a preview of the real goods, not a general illustration of the pattern.
You will see the abbreviation in several places:
- On a designer’s spec sheet or purchase order, where “CFA required” means no fabric ships until approval is given.
- In workroom conversations, where a drapery maker asks the designer for a signed-off cutting before cutting into a client’s yardage.
- In search results, where it is easily confused with unrelated companies that share the letters. In fabric and interior design, it always means cutting for approval.
CFA, strike-off, swatch and memo sample
These terms overlap in everyday talk, but they are not the same thing.
| Term | What it is | Cut from your actual stock? | Best used for |
|---|---|---|---|
| CFA (cutting for approval) | A cutting from the roll or lot your order will come from | Yes | Final sign-off on color and quality |
| Swatch or memo sample | A small piece to show pattern, color and hand | Not necessarily | Early selection and comparing options |
| Strike-off | A small sample made before production of a custom fabric, trim or carpet | No, it is made before the production run | Approving a custom design before it is manufactured |
The difference between a CFA and a strike-off is explained by FBM Sourcing: a strike-off is made before production, while a CFA is cut from stock the order will come from. For a designer-fabric order sold by the yard, the CFA is the step that matters, because the fabric already exists.
Why a CFA protects your project
Fabric is woven, dyed and finished in batches. Color can shift slightly from one dye lot to the next, even when the pattern name and number are identical. If a project needs one color across a large order, the approval has to be tied to the dye lot that will be used. A CFA does that because it is cut from the stock the order will come from, while a swatch chosen months earlier does not.
That matters most in three situations.
Multiple panels in one room
A pair of drapery panels is cut from one length, so they match each other. A room with a bay window, a sliding door and two side windows is another matter. If the yardage is split across lots, a subtle difference shows when panels hang side by side. Approving a cutting from the lot you will receive lets you or your workroom confirm the match before sewing begins.

Large upholstery and hospitality work
A sofa, banquette or run of dining chairs often needs more fabric than one roll holds. Color consistency, pattern repeat and surface texture all need to be checked against the lot that will be shipped. Our hospitality grade upholstery fabric collection serves exactly this kind of project, where durability and a uniform look both count.
Reorders and additions
A client who loved the drapes in the living room wants matching ones in the den a year later. A new cutting compared against the original panels tells you whether the new lot is close enough, before anyone cuts and sews.
Who asks for a CFA
Interior designers use a CFA as the formal step between selecting a fabric and placing the purchase order. It also gives them something concrete to put in front of a client for sign-off.
Drapery workrooms and upholsterers use it to protect themselves. Once yardage is cut and sewn, a color complaint becomes expensive. A signed-off cutting is the reference both sides can point to.
Homeowners often do not call it a CFA, but the logic is the same. If you are ordering enough fabric for custom curtains, a sample from the stock you will receive removes most of the guesswork. Our guide on why fabric samples matter for custom window treatments covers how a screen, a showroom and a window each change the way a color reads.
DIY sewers and decorators benefit when a project uses many yards, such as lined drapery for a whole floor of a house. Matching color across every panel is the difference between a polished result and a visible seam of shade.

How to request and evaluate a CFA
Step 1: Narrow down with samples first
Do not start with a CFA. Start with small samples to choose between two or three candidates. Our walkthrough on how to request fabric samples for home décor projects shows how to do this. The CFA is for the final choice, once you know the fabric is right in design.
Step 2: Tell the seller what you need it for
Give the fabric name or item number, the approximate yardage, and the project. State whether the order must match an existing piece or other fabrics in the room. The more precise the request, the more useful the cutting.
Step 3: Confirm it comes from the lot you will receive
The whole point is that the cutting represents the stock your order will come from. Ask the seller to confirm that the cutting is from the roll or lot that will be used for your yardage. If yardage will be split across rolls, say so.
Step 4: Evaluate it against a standard
In the contract textile trade, the idea of a reference standard is formalized. The ACT Voluntary Quality Guidelines describe a master sample as the standard for evaluating quality, including color and pattern repeat, and as the essential tool for comparison and communication between buyer and seller. The same document says that when a master sample is established, the final approval standard should be cut from the initial production run, not from sample blankets, lab dips or test yardage, and should be at least 5 by 7 inches or a full repeat.
You do not need to run a lab test at home, but the principle carries over. A useful cutting is large enough to show the whole pattern repeat and is taken from real stock. If your fabric has a large repeat, a tiny snippet will not show whether the motif lines up with your window width or seat panel.
Step 5: Check it where it will live
Hold the cutting against the window, the wall color, the flooring and any upholstery nearby. Look at it in morning light, afternoon light and under the lamps you use in the evening. Hang it, do not just lay it flat, because drape changes how color and sheen read. For sheer and satin finishes, view it with light behind it and in front of it.
Step 6: Approve in writing and keep the cutting
If you approve, say so in an email or on the purchase order, naming the fabric and the cutting you reviewed. Keep the cutting itself. When the yardage arrives, hold the two together in the same light. This is the comparison that settles any question.
What to look at when judging a cutting
| Check | What to look for |
|---|---|
| Color | Match against your reference piece or room palette in several lights |
| Pattern repeat | Whether the full repeat is visible and the motif scale suits your panel width |
| Hand and drape | How it falls when hung, and how stiff or soft it feels |
| Surface | Satin sheen, embroidery density, pile direction on velvet |
| Width | The usable width, which affects how many widths a panel needs |
| Fiber content | Matches the listing, which affects cleaning and sun exposure |
For window treatments, the way a fabric falls is as important as its color. Our drapery fabric selection guide and our piece on how to choose the right fabric for drapery walk through weight, lining and fullness so the cutting you approve is also the right fabric for the job.
Returning cut fabric: what to check before you order
A CFA lowers the chance you will need a return, but it is still sensible to read the terms before ordering yardage. Fabric sold by the yard is cut to your length, and many sellers handle cut goods differently from stock items such as ready-made panels. Policies vary by seller, so read the one on the page where you buy.
Before you place an order, look for these points:
- Whether cut yardage can be returned at all, and whether that depends on the cut being unwashed, uncut further and in its original condition.
- The time window for reporting a problem or starting a return, counted from delivery.
- Who pays return shipping, and whether a restocking fee applies.
- What counts as a defect, such as a flaw in the weave or printing, as opposed to a color you simply expected to look different.
- How custom or made-to-order items are treated, since a custom drapery order is made for one window.
A signed-off cutting is useful here. If the delivered fabric is different from what you approved, you have a clear reference to compare. If it matches, you know the decision was yours and the yardage is what you chose. Either way, inspect the fabric the day it arrives, before cutting or sewing, and keep the packaging and the cut ends in case you need them.
Ready-made curtains, marine and utility fabric
A CFA is most relevant to yardage, but the thinking applies to other purchases.
For ready-made curtain panels, the panels are finished and sold per panel, so you are choosing size, header style and color rather than approving a cut length. Samples help with color and fabric feel before you commit to several panels.
For marine and utility fabric, the uses are more functional: exposure, abrasion and cleaning matter as much as color. If you are covering several cushions or a whole seating area, the same rule holds. Confirm the color against the material you will receive, not a photograph.
How we approach this at Beautiful Windows Elgin
We sell designer fabrics by the yard, including jacquard satin, embroidered, upholstery, marine and utility fabrics, along with ready-made curtains, fabric samples and nationwide shipping from Columbia, SC. We also offer design consultations, custom drapery making and installation guidance, so the person helping you choose the fabric is also thinking about how it will be sewn and hung.
If you are planning a custom window treatment and want to talk through fabric, fullness and lining before you commit, you can book an appointment or browse the full range on our home page.
Workrooms and designers who want a dependable partner for drapery production can read our overview of the best drapery workroom for interior designers. Our custom drapery workflow guide shows where fabric approval sits in the sequence from measuring to installation.
Our perspective
Color agreement is the quiet center of every drapery job. A client rarely remembers the measurements, but they always remember whether the panels looked like the fabric they chose.
That is why we put so much weight on samples and on conversation before an order. A fabric chosen on a screen is a first impression. A piece you can hold at your own window, in your own light, is a decision. We would rather you take the time to make that decision with a physical piece in hand than rush into yardage.
For workrooms and designers, the same discipline protects the whole chain. Approve the fabric, record what was approved, and compare it when the goods arrive. For homeowners, it means the curtains in your room are the ones you pictured.
Our curated selection of designer fabrics, our sample support and our one-on-one design consultations exist for this reason: so the fabric you approve is the fabric you hang.
Marrion
FAQ
What does CFA stand for in interior design?
CFA stands for cutting for approval. It is a piece of fabric cut from the stock an order will come from, sent so the buyer can approve the color and quality before the full yardage is cut. Designers and workrooms use it as a formal sign-off step.
Is a CFA the same as a fabric sample?
Not exactly. A general sample or swatch shows the pattern and color range, while a CFA is cut from the actual roll or lot your order will be filled from. A strike-off is different again: it is a small sample made before production of a custom fabric, trim or carpet.
How big should a cutting for approval be?
The ACT quality guidelines say a final approval standard should be at least 5 by 7 inches or a full pattern repeat. For a fabric with a large repeat, ask for the full repeat so you can see how the motif sits on your panel or seat.
Why can the color change between my sample and my order?
Fabric is made in batches, and color can differ from one dye lot to another. A sample chosen earlier may come from a different lot than the one your order is cut from. Approving a cutting from the lot you will receive ties your decision to the actual goods.
Can I return fabric that has been cut from the roll?
It depends on the seller. Cut yardage is often treated differently from stock items, so check the return window, who pays return shipping, any restocking fee and how defects are defined before you order. Inspect the fabric as soon as it arrives and before you cut or sew.
Sources
- What Is a CFA (Cutting for Approval) in Contract Upholstery?
- ACT Voluntary Quality Guidelines
- Cutting for approval policy page



